The ZSC31050 is a CMOS integrated circuit for amplification and sensor-specific correction of bridge sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift and non-linearity by a 16-bit RISC microcontroller running a correction algorithm. The ZSC31050 accommodates virtually any resistive bridge sensor (e.g., piezo-resistive and steel-membrane-based pressure sensors). In addition, the device can interface to a separate temperature sensor. The bi-directional digital interfaces (I2C, SPI, ZACwire™) can be used for a simple PC-controlled calibration procedure, encompassing writing and programming a set of calibration coefficients into an on-chip EEPROM. The ZSC31050 has been designed for industrial, medical and consumer applications and is specifically suited for most pressure sensors. It can also be used with force, torque, acceleration, angle, position and revolution sensors.

Features

  • Digital compensation of sensor offset, sensitivity, temperature drift and non-linearity
  • Accommodates nearly all bridge sensors via PGA and programmable ADC
  • Capable of conditioning bridge sensor signals ranging from 1 to 275mV/V
  • Sensor connections check and aging detection
  • Temperature compensation via internal diode, external diode or bridge sensor element
  • Output options: voltage (0 to 5V), current (4 to 20mA), PWM, I2C , SPI, ZACwire™ (one-wire interface), alarm
  • Adjustable ADC resolution (up to 15-bit) versus sampling rate (up to 3.9kHz)
  • Selectable bridge excitation: ratiometric voltage, constant voltage or constant current
  • Input channel for separate temperature sensor
  • Operation temperature range, depending on product version, up to -40°C to +150°C
  • AEC-Q100 qualification (temperature grade 0)
  • Supply voltage: +2.7V to +5.5V, with external JFET: 5 to 40 V
  • Available in SSOP16 or as die

Product Options

注文可能な製品ID Part Status Pkg. Code Pkg. Type Lead Count (#) Temp. Range Carrier Type 購入/サンプル
ZSC31050FAB Active DICE WAFER 0 -40 to 125°C Wafer
Availability
ZSC31050FAC Active DICEF WAFER 0 -40 to 125°C Wafer
Availability
ZSC31050FAG1-R Active PYG16 SSOP 16 -40 to 125°C Reel
Availability
ZSC31050FAG1-T Active PYG16 SSOP 16 -40 to 125°C Tube
Availability
ZSC31050FEB Active DICE WAFER 0 -40 to 150°C Wafer
Availability
ZSC31050FEC Active DICEF WAFER 0 -40 to 150°C Wafer
Availability
ZSC31050FEG1-R Active PYG16 SSOP 16 -40 to 150°C Reel
Availability
ZSC31050FEG1-T Active PYG16 SSOP 16 -40 to 150°C Tube
Availability
ZSC31050FIB Active DICE WAFER 0 -25 to 85°C Wafer
Availability
ZSC31050FIC Active DICEF WAFER 0 -25 to 85°C Wafer
Availability
ZSC31050FIG1-R Active PYG16 SSOP 16 -25 to 85°C Reel
Availability
ZSC31050FIG1-T Active PYG16 SSOP 16 -25 to 85°C Tube
Availability

技術資料

タイトル 他の言語 タイプ 形式 サイズ 日付
データシート
ZSC31050 Short-Form Datasheet Short Form Datasheet PDF 313 KB
ZSC31050 Datasheet Datasheet PDF 854 KB
ユーザーガイド
Choosing the Right Sensor Signal Conditioning IC Guide PDF 300 KB
ZSC31050 SSC Evaluation Kit Description Manual PDF 1.22 MB
ZSC31050 Functional Description Manual PDF 628 KB
アプリケーションノート、ホワイトペーパー
ZSC31050 Application Note - 0-to-10V Analog Output Application Note PDF 542 KB
ZSC31050 Application Note - I2C Reset Application Note PDF 286 KB
ZSC31050 / ZSC31150 / ZSSC313X / ZSSC3154 / ZSSC3170 Application Note - RBIC1 Calibration DLL Application Note PDF 275 KB
ZSC31050 AN - Temperature Sensing with Thermocouples Application Note PDF 986 KB
ZSC31050 Application Note - Two-Wire Current-Loop Output Application Note PDF 1.09 MB
ZSC31010/ZSC31015/ZSC31050 App Note - External Protection Circuitry Application Note PDF 64 KB
ZSC31050 Application Note - Temperature Sensing with PTC RTDs Application Note PDF 615 KB
IDT Wafer Dicing Guidelines Application Note PDF 44 KB
ZSC3xxxx / ZSSC3xxx Application Note-Interfacing Single-Ended Sensor to Differential SSC Application Note PDF 89 KB
その他資料
Sensing Technologies and Sensor Solutions Overview 简体中文 Overview PDF 1.51 MB
Sensor Signal Conditioning ICs for Industrial and Consumer Applications (日本語) English Overview PDF 6.88 MB
IDT CAD Altium Libraries for AID Products Rev 20160819 PCB Design Files ZIP 1.20 MB
ZSC31050 Die Dimensions and Pad Locations Technical Brief PDF 258 KB
ZSC31050 SSOP16 Package Specifications Technical Brief PDF 109 KB
ZSC31050 Bridge Current Excitation Spreadsheet Rev. 1.70 Miscellaneous XLS 327 KB
ZSC31050 Calibration Current Loop Rev 1.00 Spreadsheet Miscellaneous XLS 46 KB
ZSC31050 Alarm Parameter Calculation Spreadsheet Rev. 1.00 Miscellaneous XLSX 13 KB
SSC Temperature Profile Calculation Spreadsheet Rev 1.03 Miscellaneous XLSX 53 KB
ZSC31050 Bandwidth Calculation Spread Sheet Rev. 1.61 Miscellaneous XLS 230 KB

ソフトウェア/ツール

タイトル 他の言語 タイプ 形式 サイズ 日付
ZSC31050 AN 0-10V Output - Gerber Files Rev 6.1 (zip) Software Tool ZIP 847 KB
ZSC31050 Evaluation Kit Software Rev. 2.2.5.0 Software ZIP 4.07 MB

Evaluation Boards

Part Number Title 昇順で並び替え
ZSC31050-MCS Mass Calibration System for ZSC31050
ZSC31050KIT Evaluation Kit for ZSC31050